580CL Car Logger Baler » Specs
» Download specifications for Al-jon’s 580CL Car Logger (PDF)
ENGINE
- Choice of John Deere, Cummins or Caterpillar 6-cylinder Tier III turbo diesel engine
- Front mounted for easier maintenance access
HYDRAULIC SYSTEM
Double pump (baler):
- 120 gallons per minute (454 lpm) at 2100 rpm
Filtration:
- Kidney loop 5 micron filtration
Multiple relief protection:
- 3000 PSI
Operating pressure:
- 1400 – 2700 PSI
Lid cylinders:
- 8 in. (203 mm) bore x 29 in. (737 mm) stroke — 4 in. (102 mm) chrome rods
Ram cylinders:
- 1 – 12 in. (305 mm) bore x 128 in. (3251 mm) stroke — 9 in. (229 mm) chrome rod
- 1 – 12 in. (305 mm) bore x 88.5 in. (2248 mm) stroke — 9 in. (229 mm) chrome rod
REAR AXLE
Tri-axle with 11:00 in. ( 279.4 mm) x 22.5 in. (571.5 mm) tubeless tires
CAPACITIES
Fuel:
- 90 gallons (341 liters)
Hydraulic:
- 290 gallons (1098 liters)
MATERIAL HANDLER
Model 1100 knuckle boom material handler
Ergonomically designed cab:
- Air conditioning/heater
- Electronic joy stick controls
- Fully adjustable seat
- 25 ft. 8 in. (7823 mm) reach
- 4,000 pounds (1814 kg) lifting capacity at 20 ft. (6096 mm) reach
- Load sensing piston pump
- 360 degree continuous rotation
ELECTRICAL
- Heavy duty dual 12 volt batteries
- Solenoid controlled hydraulic functions – 12 volt fuse protected
- All solenoids and control boxes are sealed water tight
- Daily and total bale cycle count
BALING CHAMBER
- “L” box design with stress relieved welds
- Lower baling chamber allowing better operator visibility
Dimensions:
- 10 ft. (3048 mm) wide x 19 ft. (5867 mm) long
BALE SIZE
- 40 in. (1016 mm) wide x 25 in. (635 mm) high x variable length
BALE DENSITY
- 30-80 lb/cu. ft. (480-1281 kg/cu. m)
HEIGHT
- 13 ft. 6 in. (4115 mm)
LENGTH
- 53 ft. (16154 mm)
WEIGHT
- 93,000 lbs. (42,184 kg)
PRODUCTION
- Up to 25 car bodies per hour
- 15 – 20 tons (13 – 18 tonneS) of loose scrap per hour
» Contact Al-jon today to find out more about our 580CL Car Logger.
