Impact V Car Crusher » Specs

Click here to download the specifications for Al-jon’s Impact V Car Crusher (PDF)

HYDRAULICS:
Lid Cylinders: 8 in. (20.3 cm) bore – 5 in. (12.7 cm) diameter shaft – hard chrome
Plated 81 in. (205.7 cm) stroke
Self-aligning ball bushing – both ends
Approved operations to 3250 PSI (22,407 kPa) – Total combined cylinder force – 301,600 lbs. (136,803 kg)
System Pressure: Main relief pressure 3000 PSI (20,684 kPa). Work port relief pressure 3250 PSI (22,407 kPa)
Pumps: Tandem gear pump 39 gpm (147.6 lpm) x 2
Directional Valves: Hydraulically operated and electrically controlled.
Fluid Capacity and Filtering: 120 gallon (454 liter) hydraulic reservoir tank, clean-out accessibility provided 100% filtration to 10 micron. All fluid is passed through replaceable suction cartridge type filters.

POWER PACKAGES – 100 HP four cylinder Cummins or John Deere turbo diesel engine – 40 gallon (151 liter) fuel capacity
ELECTRICAL – 12 Volt DC – Solenoid controlled hydraulic functions. Fuse protected. All solenoids and control boxes are sealed.
CYCLE TIME – Crush and stack up to 5 cars for easy loading onto a flat bed. Full Extend = Full retract of Cylinder 49 seconds

DIMENSIONS/CAPACITIES:
Length: Overall Approximately 43 ft. (13.1 m)
Travel Height: 13 ft. 5 in. (409 cm) = travel width 8 ft.  3.75 in. (253 cm)
Operating Height: 20 ft. 1 in. (612 cm)
Weight: 57,700 lbs. (26,173 kg) – At kingpin 26,600 lbs. (11,159 kg) – At Tandem 33,100 lbs. (15,014 kg)
Portable with Tandem Axle and 11:00 x 22.5 Tubeless tires
Ground Clearance: 17.5 in. (44 cm)
Loading Area: 84 in. (213 cm) wide, 240 in. (609 cm) length – 90 in. (228 cm) high-lid fully raised – 9 in. (23 cm) high-lid fully lowered

AL-JON IMPACT V CAR CRUSHER SPECIAL FEATURES:

Revolutionary Quad-Post Guide System – The key to the Quad-post Guide System is the equal distribution of the crushing force to the four corners of the crushing lid. The crushing lid is connected to the four sliding guides by heavy-duty pivot lugs mounted on each corner. The stress is distributed equally across the guide post, sliding guides and pivot lugs, giving the Impact V greater stability and durability.

Exclusive Cylinder Locking System – Raise the cylinder cases, lock them into position (with the simple key-way design) and it’s ready to work. This unique design has reduced total set-up time to less than one-minute. This gives the cylinders on the Impact V more power by pushing down to crush the material.

High Strength Back Wall – The back wall has been designed incorporating high strength steel, which provides a solid backboard for positioning vehicles during loading and unloading. Over 25% of the Impact V’s 57,000 pounds are constructed out of high strength steel. This makes the Impact V lighter as well as stronger.

Contact Al-Jon today to find out more about our Impact V Car Crusher.