ENGINE - Choice of John Deere, Cummins or Caterpillar 6-cylinder turbo diesel engine. Front mounted for easier maintenance accesss.
HYDRAULIC SYSTEM
Double pump (baler): 120 gpm (454 lpm) at 2100 rpm
Filtration: Kidney loop 5 micron filtration
Lid cylinders: 8 in. (20.3 cm) bore x 29 in. (73.7 cm) stroke -- 4 in. (10.2 cm) chrome rods
Ram cylinders:
1 - 12 in. (30.5 cm) bore x 128 in. (325 cm) stroke -- 9 in. (22.9 cm) chrome rod
1 - 12 in. (30.5 cm) bore x 88.5 in. (225 cm) stroke - 9 in. (22.9 cm) chrome rod
REAR AXLE - Tri-axle with (12) 11:00 in. ( 279.4 mm) x 22.5 in. (571.5 mm) tubeless tires
TANK CAPACITIES - Fuel: 90 gallons (341 liters) Hydraulic: 290 gallons (1098 liters)
CRANE - Model 1010 Knuckle boom material handler. Large modern crane cab includes:
-
Air conditioning/heater
-
Joy stick controls
-
Fully adjustable seat
-
25 ft. 8 in. (7.85 m) reach
-
4,000 pounds (1814 kg) lifting capacity at 20 ft. (6.1 m) reach
-
Load sensing piston pump
-
540 degree direct manually controlled hydraulics
ELECTRICAL - Heavy duty dual 12 volt batteries. Solenoid controlled hydraulic functions - 12 volt fuse protected. All solenoids and control boxes are sealed water tight.
BALING CHAMBER - Dimensions - 10 ft. (305 cm) wide x 19 ft. (579 cm) long with "L" box design with stress relieved welds. Lower bailing chamber allowing better operator visibility.
BALE SIZE - 40 in. (101.6 cm) wide x 25 in. (63.5 cm) high x Variable length
BALE DENSITY: 30-80 lb/cu. ft. (480-1281 kg/cu. m)
HEIGHT: 13 ft. 6 in. (411 cm)
WEIGHT: 93,000 lbs. (42,184 kg)
PRODUCTION: Up to 25 car bodies per hour or 20 tons (18.1 tonne) metal scrap per hour
