HYDRAULICS:
Lid Cylinders: 8" bore - 5" diameter shaft - hard chrome
Plated 81" stroke
Self-aligning bale bushing - both ends
Approved operations to 3250 PSI - Total combined cylinder force - 301,600
System Pressure: Main relief pressure 3000 PSI. Work port relief pressure 3250 PSI.
Pumps: Tandem gear pump 39 GPMx2
Directional Valves: Hydraulically operated and electrically controlled.
Fluid Capacity and Filtering: 120 gallon hydraulic reservoir tank, clean-out accessibility provided 100% filtration to 10 micron. All fluid is passed through replaceable suction cartridge type filters.
POWER PACKAGES - 100 HP @2500 RPM Cummins or John Deere Diesel - 40 gallon fuel capacity
ELECTRICAL - 12 Volt DC - Solenoid controlled hydraulic functions. Fuse protected. All solenoids and control boxes are sealed.
CYCLE TIME - Crush and stack up to 5 cars for easy loading onto a flat bed. Full Extend = Full retract of Cylinder 49 seconds
DIMENSIONS/CAPACITIES:
Overall Length: Approximagely 43'
Travel Height: 13'5" = travel width 8'
Weight: Overall 57,700 lbs. - At kingpin 26,600 lbs - At Tandem 33,100 lbs
Operating Height: 20'1"
Portable with Tandem Axle and 11:00 x 22.5 Tubeless tires
Ground Clearance: 17.5"
Loading Area: 84" wide, 240" length - 90" high-lid fully raised - 9" high-lid fully lowered
AL-JON IMPACT V CAR CRUSHER SPECIAL FEATURES:
Impact V's Revolutionary Quad-Post Guide System - The key to the Quad-post Guide System is the equal distribution of the crushing force to the four corners of the crushing lid. The crushing lid is connected to the four sliding guides by heavy-duty pivot lugs mounted on each corner. The stress is distributed equally across the guide post, sliding guides and pivot lugs, giving the Impact V greater stability and durability.
Impact V's Exclusive Cylinder Locking System- Raise the cylinder cases, lock them into position (with the simple key-way design) and it's ready to work. This unique design has reduced total set-up time to less than one-minute. This gives the cylinders on the Impact V more power by pushing down to crush the material.
Impact V's High Strength Back Wall- The back wall has been designed incorporating high strength steel, which provides a solid backboard for positioning vehicles during loading and unloading. Over 25% of the Impact V's 57,000 pounds are constructed out of high strength steel. This makes the Impact V lighter as well as stronger.
